Best Camera Settings for Product Photography

 

5 Best Camera Settings for Product Photography

5 Best Camera Settings for Product Photography in 2021

Regardless of what camera is utilized, Canon or Nikon, DSLR or mirrorless, shooting manually is a hard step for beginners. If you cannot understand what camera settings should be there to get professional product photos, it is not something to worry about. Yes, it is so trouble-free to set Auto and let your camera work instead of your choice of aperture ISO or shutter speed. Alternatively, you are to control the parameters of your camera and take the best product photos.

Adjust ISO, Aperture, Shutter Speed for Your Product Photography

Camera’s settings affect the photo’s quality in different lighting conditions. Aperture focuses on how much light passes through, ISO settings adjust sensitivity to light, and shutter speed is something related to how long the light reaches your sensor.

On the example of and Fotodiox Pro lightbox and Canon EOS 80d, you would understand how to set all such camera settings to get the required results. Any other camera will also have similar settings if it is in Manual mode. Therefore, you are required to make a difference in your product photography, which can drag the attention of the customers. So, you need to go through one by one to the following settings, which can assist you in capturing your product photos.

1. You Should Make Low ISO

ISO means how much the camera sensor is sensitive to the light. If the ISO is low, then the sensor is less sensitive, and it will take a little longer to shot. If you desire to take shots faster and to shoot in low light, increase ISO. Nevertheless, the photos, this way, will turn out to be granular.

Measurements of ISO usually vary from 100 to 3200. “ISO 100” implies a full second while “ISO 3200” – 1/32 second.

To avoid noise, use the lowest ISO. Adjust your camera on a tripod and look at the target product when you have set camera light settings. Start with the smallest number of ISO and then gradually enhance it until the product is rightly lit.

2. You Should Set High Aperture

Aperture controls the quantity of light that passes through the lens to your camera. It determines the depth of field of the picture.

Aperture is regulated by the F-stops system and varies typically from F1 to F22. If the number is low or F1, it means that a more substantial amount of light can reach a camera, and shutter speed would be faster.

Lower F-stops also create a shallow depth of field, which provides you a possibility to focus on particle details while the focus falls and makes the focal point blurred. Shutter speed creates no problem when taking the shot as your camera is set on a tripod, and the light is constant. For full focus, use as high F-stop as possible, for instance, F16 to F22.

The only case when you need a lower aperture is if you are going to emphasize a particular detail, such as a door handle or a belt buckle. For everything else, you will want to have the whole product in focus.

See More